العودة إلى المدونة
أدلة إرشادية 2026-11-21 PETKIT UK 0 مشاهدة

PETKIT Filter Unit 3.0: When and How to Change It

PETKIT Filter Unit 3.0: When and How to Change It

Learn when to replace your PETKIT Filter Unit 3.0 and get step-by-step instructions for a smooth swap. Keep your pet's water fountain running clean with these simple maintenance tips.

Why Change the Filter Unit 3.0?

The Filter Unit 3.0 is the heart of your PETKIT fountain's water-cleaning system. Over time, the high-density micropore filter and double filter components trap debris, hair, and impurities. Replacing it regularly keeps water flowing freely and prevents odors or bacterial buildup. For most PETKIT fountains, a fresh filter every two to four weeks is a good rule of thumb, but always follow your fountain's manual for the exact schedule.

How to Replace the Filter Unit 3.0

Follow these steps to swap the old filter for a new one. Always start with a clean fountain and fresh water.

  1. Soak the new filter: Place the new Filter Unit 3.0 in clean water and let it soak for at least 10 minutes. This primes the filter material for best performance.
  2. Remove the old filter: Unplug the fountain and take out the used filter. Dispose of it properly.
  3. Install the new filter: Insert the soaked filter into the fountain's filter slot. Ensure the silica gel sealed ring with lock key design snaps into place for a secure fit.
  4. Reset the device: After replacing the filter, reset your fountain according to the device instructions. This step is important to clear the filter replacement indicator (if your model has one) and maintain proper operation.
  5. Refill and run: Fill the fountain with fresh water, plug it back in, and let it run. Check for any leaks around the filter seal.

Filter Unit 3.0 at a Glance

  • Filter Unit 3.0 -5pcs: PETKIT filter for EVERSWEET2, EVERSWEET2S, EVERSWEET3, EVERSWEET3 PRO, and EVERSWEET SOLO. 5 pieces per pack. Double filter components with a high density micropore filter. Silica gel sealed ring with lock key design. This confirms compatibility with popular PETKIT fountain models and explains the filter's layered construction for effective water purification.
    Filter Unit 3.0 -5pcs
    Filter Unit 3.0 -5pcs
  • Filter Unit 3.0 -5pcs: Attention: Soak the new filter for at least 10 minutes in clean water before installing. Do not forget to reset the device after replacement. These two steps are essential for proper filter function and to avoid error messages or reduced flow. Skipping them can shorten filter life or cause the fountain to run poorly.

Which PETKIT Fountains Use This Filter?

The Filter Unit 3.0 is designed for the EVERSWEET2, EVERSWEET2S, EVERSWEET3, EVERSWEET3 PRO, and EVERSWEET SOLO fountains. If you own one of these models, this filter pack (5 pieces) is the correct replacement. Double-check your fountain's model number before purchasing to ensure a perfect fit.

Signs It's Time for a Change

Even if you track the calendar, your fountain may tell you when the filter needs replacing. Look for these clues: reduced water flow, a stale or musty smell from the water, visible discoloration of the filter material, or the fountain's filter replacement light (if equipped). When any of these appear, swap the filter promptly to keep your pet drinking fresh water.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي