EverSweet Ultra with Camera: Features and Setup Guide
By PETKIT UK | Published: 2026-10-19
Category: Product Reviews
Learn how to set up the PETKIT EverSweet Ultra with Camera, a smart cat fountain that keeps water fresh and tracks your pet's drinking habits.
Quick answer
The EverSweet Ultra with Camera is a self-cleaning water fountain that uses a OneWay Mechanism to separate fresh and used water, plus a PETKIT AI camera to monitor your cat's drinking. Setting it up takes about 10 minutes.
Why the OneWay Mechanism matters
Most fountains recirculate the same water, which can collect debris and bacteria. The EverSweet Ultra's OneWay Mechanism sends fresh water to the tray and drains used water out, so your cat always drinks from a clean source. This reduces the need for daily cleaning.
What the AI camera adds
The built-in PETKIT AI camera tracks each pet and sends an alert if something looks off. This is useful for multi-pet households or if you worry about a cat that doesn't drink enough. The camera does not record video continuously; it only captures activity and alerts.
How to set up the EverSweet Ultra with Camera
- Unpack and rinse the parts: Remove the fountain base, tray, water tank, filter, and pump. Rinse all parts with clean water. Do not use soap; residue can affect taste. Soap residue may deter your cat from drinking. Rinse thoroughly.
- Install the filter and pump: Place the filter into the designated slot in the water tank. Connect the pump to the tubing and secure it in the base. Ensure the pump is fully submerged when water is added. If the pump runs dry, it may overheat. Always fill the tank before powering on.
- Fill the tank and assemble the fountain: Fill the water tank with fresh, cool water. Do not exceed the max fill line. Place the tray on top and snap it into place. Check that the OneWay Mechanism aligns correctly. Overfilling can cause water to spill into the drainage area. Stick to the max line.
- Power on and connect to the app: Plug in the fountain and press the power button. Open the PETKIT app, add a new device, and follow the on-screen instructions to pair via Wi-Fi. The camera will activate after pairing. Ensure your phone is on a 2.4 GHz Wi-Fi network; 5 GHz is not supported.
- Configure camera and alerts: In the app, name your pet and set activity zones. Enable push notifications for drinking alerts. Adjust camera sensitivity to avoid false triggers from shadows or other pets. High sensitivity may cause frequent notifications. Start with medium and adjust.
- Perform the one-tap cleaning test: Press the cleaning button on the fountain or in the app. The tray will lift and the used water drains out. Wipe the tray with a damp cloth and rinse it before reassembling. The one-tap clean handles the tray only. The pump and filter still need manual cleaning every 2 weeks.
Product highlights
- EverSweet Ultra with Camera: OneWay Mechanism sends fresh water to the tray and drains used water out. This keeps the drinking area constantly clean without manual scrubbing.
EverSweet Ultra with Camera - EverSweet Ultra with Camera: PETKIT AI camera tracks each pet and alerts you the moment something looks off. You can monitor drinking habits remotely and catch potential health issues early.
- EverSweet Ultra with Camera: SpringFlow mimics natural running water, even the pickiest drinkers keep coming back. Encourages cats that avoid still water to drink more, supporting hydration.
